WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Place the touch pad on the palm-rest assembly.
2
Slide the tabs on the touch-pad bracket into the slots on the palm-rest
assembly.
3
Align the screw holes on the touch-pad bracket with the screw holes on the
palm-rest assembly.
4
Replace the screws that secure the touch-pad bracket to the palm-rest
assembly.
5
Adhere the tape over the touch-pad bracket.
6
Connect the touch-pad cable to the touch pad.
Post-requisites
1
Replace the
system
2
Replace the
heat-sink
3
Replace the
IO
4
Replace the
wireless
5
Replace the
memory
6
Follow the procedure from step 3 to step 5 in "Replacing the
Replacing the touch pad
computer. After working inside your computer,
After working inside your
board.
assembly.
board.
card.
module.
computer. For more safety
hard
drive".
Replacing the touch pad
32
75