WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the battery.
2
Follow the procedure from step 1 to step 3 in "Removing the
3
Remove the keyboard.
4
Follow the procedure from step 1 to step 5 in "Removing the
Procedure
1
Remove the screw that secures the I/O board to the palm-rest assembly.
2
Turn the I/O board over.
3
Peel the tape that secures the I/O-board cable to the I/O board.
4
Open the latch and disconnect the I/O-board cable from the I/O board.
5
Lift the I/O board off the palm-rest assembly.
Removing the I/O board
computer. After working inside your computer,
After working inside your
computer. For more safety
optical
base
cover".
Removing the I/O board
21
drive".
50