Passenger Side Lower Panel Removal; A-Pillar Trim Removal - Mazda 0000-8F-Z80 Installation Instructions Manual

Screws
Vehicle front
Screw
Vehicle Front
(3)
Vehicle front (4)
Vehicle Front
Clip B
Clip B
Clip B Clip B
Clip A
Clip A
Passenger Side A-Pillar
Vehicle Front
Nipper
Nipper
Grommet
Grommet
A-pillar trim
Tab
Lead Wire
Part B
Clip B
A-Pillar Trim
Vehicle front
Vehicle front
Vehicle Front
Guides
Guides
Bolt
Clips
Clip
Clips
Clip
(2)
(1)
(1)
Seaming Welt
Seaming Welt

Passenger side lower panel removal

1. Remove 3 Screws and 1 Bolt.
Bolt tightening torque: 2.0 - 6.0 N•m (1.5 - 4.4 ft•lbf)
2. Remove lower panel by pulling in the order of arrows (1-4).

A-Pillar trim removal

1. Partially peel back the seaming welt.
2. Dislodge the Passenger side A-pillar trim by pulling on the
shaded area to disengage Clip B and A.
Caution
• Do not use excessive force, A-pillar could be damaged.
3. Cut the A-pillar tab connecting part B and the grommet of
the A-pillar tether clip.
4. Remove the A-pillar trim while detaching guides.
8