CX-3
Hood switch harness
2 x Wire Ties (Black)
Vehicle wiring harness
Vehicle Front
Mazda2
Hood switch harness
2 x Wire Ties (Black)
Vehicle wiring harness
Vehicle Front
8. MAZDA MOBILE START INSTALLATION
Antenna template
CX-3
12. Secure hood switch harness to vehicle harness with
1 wire tie (black).
13. Bundle up excess hood switch harness and secure to
the vehicle harness using 1 wire tie (black) between the
Vehicle harness clip
vehicle harness clip and vehicle harness branch.
Vehicle harness branch
Mazda2
12. Secure hood switch harness to vehicle harness with
1 wire tie (black).
13. Bundle up excess hood switch harness and secure to
the vehicle harness with 1 wire tie (black) just below the
Vehicle harness clip
vehicle harness clip.
GPS and TEL Antenna Installation
1.
Place the Antenna template face down on the windshield
outside the vehicle, aligning to the passenger side A-pillar
and the top right corner with the headliner temporarily
secure it with electrical tape.
12