1. Manuals
  2. Brands
  3. Mazda Manuals
  4. Remote Starter
  5. Remote Start System MPV
  6. Owner's manual

Mazda Remote Start System MPV Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Remote Start

System
OWNER'S
MANUAL
MAZDA MPV
NOTE: IF THE VEHICLE'S BATTERY IS DISCONNECTED OR GOES DEAD IT WILL BE NECESSARY TO
START THE VEHICLE AT LEAST ONCE WITH THE IGNITION KEY BEFORE THE REMOTE START FEATURE
WILL OPERATE PROPERLY AGAIN.

Advertisement

Table of Contents
loading

Related Manuals for Mazda Remote Start System MPV

Summary of Contents for Mazda Remote Start System MPV

  • Page 1: Remote Start

    Remote Start System OWNER’S MANUAL MAZDA MPV NOTE: IF THE VEHICLE’S BATTERY IS DISCONNECTED OR GOES DEAD IT WILL BE NECESSARY TO START THE VEHICLE AT LEAST ONCE WITH THE IGNITION KEY BEFORE THE REMOTE START FEATURE WILL OPERATE PROPERLY AGAIN.

  • Page 2: Table Of Contents

    Introduction Congratulations on your purchase of a Mazda Remote Start System Specifically Engineered for Mazda featuring PowerCode Technology . This easy-to-use manual details the operating instructions and benefits of the Remote Start System. Should you have questions or concerns regarding this system that this manual does not address, please contact your local Mazda dealer.

  • Page 3: Remote Control Quick Guide

    It allows you to pre-heat or pre-cool the vehicle’s interior without entering your vehicle. Your vehicle has been delivered with the original factory three or five button Mazda transmitters/retractable keys which will properly function with the remote start engaged or disengaged. The remote start can be activated regardless of whether the doors are locked or unlocked, open or closed.

  • Page 4: Remote Control Operation

    Remote Control Operation Although the remote start transmitter only has one button, it actually performs five functions. When the vehicle is sitting parked and not running, the transmitter can be used to activate the car find feature or the remote start feature. When the vehicle is running on the remote start system, the transmitter can be used to shut down the engine.

  • Page 5: Using The Remote Control Start Function

    Using the Remote Control Start Function Pre-Heating or Pre-cooling the Interior Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the vehicle, the heater or air-conditioning will activate and heat or cool the interior to your setting. Using the “Quick-Stop”...

  • Page 6: Normal Vehicle Functions

    To engage service/valet mode, turn the ignition key to the ON or Run position, press and hold the brake pedal and press the START button on the remote control transmitter. The system will beep the horn and flash the parking lights twice indicating the system is in service/valet mode. To return the system to its normal operating mode, turn the ignition key to the ON or RUN position, press and hold the brake pedal and press the START button on the remote control transmitter .

  • Page 7: Car Find Feature

    Option 1 - Reinitiate the Remote Start Function • If you notice the vehicle did not start and want to reinitiate the remote start sequence, simply push and hold the START button on the transmitter for one second. You will see the parking lights turn off, then you can reinitiate the remote start function as normal.

  • Page 8: System Maintenance

    System Maintenance Changing the Remote Control Batteries The two 3-volt lithium batteries (model CR-1220) supplied in your remote control should last approximately three years, depending on usage. When the batteries begin to weaken, you will notice a decrease in range or distance from the vehicle that your remote control operates.
  • Page 10 INS1030351 Rev. A Mazda North America Operations 11/04 PRINTED IN USA...

Table of Contents