Glove Box Removal; Decoration Panel Removal - Mazda 0000-8F-Z80 Installation Instructions Manual

Vehicle Front
Vehicle front
Hook A
(2)
Guide C
(2)
(3)
Pin B
Hook A
Removal tool
Decoration panel
Vehicle Front
Vehicle front
Decoration panel
Vehicle Front
Hook B
Hook C
(1)
Pin B
Vehicle Front
Clip A

Glove box removal

1. Push both sides of the Glove box then pull to dislodge 2
Hooks (B).
2. Remove the Glove box by pulling to dislodge 2 bottom
Hooks (C).
3. Remove Glove box under cover in order of arrows (1-3).

Decoration panel removal

1. Place hand into the glove compartment opening and push
out 3 clips (A) towards the rear of the vehicle.
2. Disengage the remaining clips (A) using the Removal tool.
3. Remove the decoration panel.
Caution
• If decoration panel is pulled out on one side, you will damage
it, make sure to pull the whole panel straight out.
7