Carrier A07049 Installation Instructions Manual page 11
Performance series ac/hp
Hide thumbs
Also See for A07049:
- Installation instructions manual (56 pages) ,
- Product data (4 pages) ,
- Installation instructions manual (93 pages)
Advertisement
Two-Piece
Installation
The following
steps should
be followed
for the installation
of the two-piece
configuration.
NOTE:
The 2-wire
pigtail
is not intended
to support
the weight
of the User
Interface.
Do not hang
the User Interface
from the equipment
Control
Module
screw terminals.
1. Remove
mounting
plate
from
back of Display
Module
by pressing
the
two tabs on the bottom
edge and pulling
away. See Fig. 4 and 5.
Fig. 4 - Press Tabs to Remove
Backplate
A07225
10
Advertisement
