Appendix B Frus - HP 5130 EI Switch Series Installation Manual

Appendix B FRUs

The HP 5130-24G-SFP-4SFP+ EI switch provides two power supply slots. One power supply can meet the
power requirement of the switch. You can install two power supplies on the switch for redundancy.
1 1 describes the power supplies available for the HP 5130-24G-SFP-4SFP+ EI switch.
Table 11 Power supplies available for the HP 5130-24G-SFP-4SFP+ EI switch
Power supply model
PSR150-A1
PSR150-D1
When two power supplies are installed, you can hot-swap a power supply. To avoid device damage and
bodily injury, follow the procedures in
Item
Rated input voltage
Max input voltage
Max output power
Rated input voltage
Max input voltage
Max output power
Figure 17 and
44
Specification
100 VAC to 240 VAC @
50 Hz or 60 Hz
90 VAC to 264 VAC @ 47
Hz to 63 Hz
150 W
–48 VDC to –60 VDC
–36 VDC to –72 VDC
150 W
Figure 18 to install and remove the power supply.
Table
Remarks
For more information
about the power supplies,
see HP PSR150-A &
PSR150-D Power Supplies
User Guide.