Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Figure 1 Hardware installation flow
Select and install power
supplies
Installing the switch in a 19-inch rack
Mounting brackets
Table 4
describes the mounting brackets provided with the switch.
Start
Install the switch
Connect the grounding
cable
Yes
Has power supply slots?
Connect the power cords
Verify the installation
Turn on the circuit breaker
Operating correctly?
End
No
Troubleshoot
the switch
No
Turn off the
circuit breaker
Yes
6