HP 5130 EI Switch Series Installation Manual page 60

LED Status
Flashing
Off
Steady on
Flashing (not 3 Hz)
Flashing (3 Hz)
Yellow LED
Off
Description
The port is sending or receiving data at 10 Gbps.
•
No transceiver module is installed in the port, or no
10 Gbps link is present on the port.
•
The port mode LED is operating in PoE mode
(applicable to the PoE switch models.)
A transceiver module is installed in the port. The port is
operating at 1 Gbps, and a link is present on the port.
The port is sending or receiving data at 1 Gbps.
The port has failed POST.
•
No transceiver module is installed in the port, or no
1 Gbps link is present on the port.
•
The port mode LED is operating in PoE mode
(applicable to the PoE switch models.)
56