Appendix B Frus; Power Supplies - HP FlexFabric 5980 48SFP+6QSFP28 Installation Manual

Appendix B FRUs

The switch uses modular design.
Table 10 FRUs available for the switch
FRUs

Power supplies

650W AC power supply
650W DC power supply
Fan trays
HPE X712 Bck(pwr)-Frt(prt) HV2 Fan Tray(JH389A)
HPE X711 Frt(prt)-Bck(pwr) HV2 Fan Tray(JH388A)
The HPE FlexFabric 5980 switch can operate correctly with only one power supply. You can install
two power supplies on the switch for 1+1 redundancy.
To ensure heat dissipation, make sure all fan tray slots on the switch have fan trays installed and the
fan trays are the same model.
Power supplies
WARNING!
When the switch has power supplies in redundancy, you can replace a power supply without
powering off the switch. Make sure the power supply to be replaced is powered off before you
replace it.
Table 11 Power supply specifications
Power supply model
650W AC power supply
650W DC power supply
Table 10 describes the FRUs available for the switch.
Specification
•
Rated input voltage: 100 VAC to 240
VAC @ 50 Hz or 60 Hz
•
Max input voltage: 90 VAC to 264 VAC
@ 47 Hz to 63 Hz
•
Max output power: 650 W
•
Rated input voltage: –40 VDC to –60
VDC
•
Max input voltage: –40 VDC to –72 VDC
•
Max output power: 650 W
39
HPE 5980 48SFP+ 6QSFP28
Yes
Yes
Yes
Yes
Remarks
For more information about the
650W AC power supply, see
HPE A58x0AF 650W AC
(JC680A) & 650W DC
(JC681A) Power Supplies User
Guide.
For more information about the
650W DC power supply, see
HPE FlexFabric Switch 650W
48V Hot Plug NEBS Compliant
DC Power Supply (JH336A)
User Guide.