HP 5130 EI Switch Series Installation Manual page 56

Switch model
• The HP 5130-24G-2SFP+-2XGT EI, HP 5130-24G-PoE+-2SFP+-2XGT (370W) EI, HP
5130-24G-4SFP+ EI, HP 5130-24G-4SFP+ EI BR, HP 5130-24G-PoE+-4SFP+ (370W) EI, and HP
5130-24G-PoE+-4SFP+ (370W) EI BR switches provide two single-color LEDs for each
10/100/1000Base-T autosensing Ethernet port to indicate its operating status.
Table 24 Description for the two single-color LEDs for the 10/100/1000Base-T autosensing
Ethernet port
Switch model
•
HP 5130-24G-4SFP+ EI
•
HP 5130-24G-4SFP+ EI
BR
•
HP
5130-24G-2SFP+-2XGT
EI
•
HP
5130-24G-PoE+-4SFP+
(370W) EI
•
HP
5130-24G-PoE+-4SFP+
(370W) EI BR
Double-color
Port mode
(green and
LED (Mode)
yellow) LED
status
status
Off
Port mode
LED
LED
(Mode)
status
Green LED
N/A
Yellow LED
Steady
green (rate Green LED
mode)
52
Description
The port is not supplying PoE.
Status Description
The port is operating at
Steady on 1000 Mbps, and a link is
present on the port.
The port is sending or
Flashing receiving data at 1000
Mbps.
No link is present on the
port, or the port is not
Off
operating at 1000
Mbps.
The port is operating at
Steady on 10/100 Mbps, and a
link is present on the port.
The port is sending or
Flashing (not 3
receiving data at
Hz)
10/100 Mbps.
Flashing
The port has failed POST.
yellow (3 Hz)
No link is present on the
port, or the port is not
Off
operating at 10/100
Mbps.
The port is operating at
Steady on 1000 Mbps, and a link is
present on the port.
The port is sending or
Flashing receiving data at 1000
Mbps.