Connecting The Switch To An Ac Power Source - HP 5130 EI Switch Series Installation Manual

Switch model
The HP 5130-24G-SFP-4SFP+ EI switch provides two power supply slots. The PSR150-A1 and PSR150-D1
power supplies are available for the HP 5130-24G-SFP-4SFP+ EI switch. The PSR150-A1 power supply
supports AC power input. The PSR150-D1 power supply supports –48 V DC power input and RPS power
input.

Connecting the switch to an AC power source

Securing the AC power cord for a hot-swappable AC power supply
1. Insert the cable tie through the hole in the power supply handle.
2. Use the cable tie to secure the AC power cord to the power supply handle.
Figure 21 Securing the AC power cord for a hot-swappable AC power supply
Securing the AC power cord for a fixed power supply
1. Insert the cable tie through the cable bridge.
2. Use the cable tie to secure the AC power cord to the cable bridge.
Available power source
HP A-RPS1600
2
1
17
Connection procedure
reference
Connecting the switch to
an RPS