Configuring The Network Admin Settings; Setting The Admin Connection - Fujitsu N7100 Operator's Manual

4.9

Configuring the Network Admin Settings

4.9.1 Setting the Admin Connection

To use the Admin Tool or Central Admin Server for the scanner, perform the connection
settings.
1. Select [Admin Connection] under [Network Admin].
 The [Admin Connection] window appears.
2. Specify each item.
3. Press the [OK] button.
 The information entered is set.
ATTENTION
If the admin connection settings are changed using the Admin Tool, the Admin Tool is
disconnected from the scanner. To continue with other settings, try reconnecting to the
scanner with the new settings.

4.9 Configuring the Network Admin Settings

Touch
Panel
109
Central Admin
Console