Using The Scanner Buttons; Using The Power Button - Fujitsu N7100 Operator's Manual

2.2

Using the Scanner Buttons

■ Using the Power Button

When the scanner is off or in standby mode, pressing the power button will start the
scanner up and display the [Login] window.
When the scanner is on, pressing the power button will show a message.
(*1): One of the following operations will startup the scanner from standby mode.
 Pressing the power button
 Touching the touch panel
Depending on the device, if a human interface device such as an external
keyboard is connected to the scanner via USB, any key operations will also
startup the scanner.
The window displayed after restarting varies according to the automatic settings
in the following way:
 If automatic login is enabled, the operation window is displayed.
 If automatic login is disabled, the [Login] window is displayed.
Shutdown
Off
Press
Operating
Lit
Login Window
Login
Operation Windows
No operation
for a set period
Press
(*1)
Standby
Blinks
No operation
for a set period

2.2 Using the Scanner Buttons

Press
52
Message
(*2)