Scanning An Additional Page; Editing Marked Characters To Be Set As Keywords - Fujitsu N7100 Operator's Manual

5.11.5 Scanning an Additional Page

On the [Scan Viewer] window, an additional page can be scanned.
1. Load the documents into the ADF paper chute.
2. On the [Scan Viewer] window, press the [Scan More] button.
 Scanning starts.
The scanning status (preview) and scan settings can be switched and shown
during a scan.
The page numbers of additional pages will follow on from the last page of the
current scanned data.
For [Print], up to 100 pages can be scanned. For other than [Print], up to 999
pages can be scanned.
When the blank page skip function is enabled, the number of scanned pages
excluding skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
 When the scan has completed, the [Scan Viewer] window opens and shows any
additionally scanned pages.

5.11.6 Editing Marked Characters to Be Set as Keywords

When character strings in marked sections are scanned to be set as keywords for the
PDF file, the recognized text from the marked sections can be edited.
HINT
For more details about setting whether or not to edit character strings in marked sections,
refer to "5.9.9 Setting a Keyword for the PDF" (page
1. On the [Scan Viewer] window, press the button appropriate for your
desired operation, such as the [Send] and [Save] buttons.
 The window where you can edit character strings in marked sections appears.
2. Edit the characters shown on the window.
3. Press the [OK] button.
 The edited characters are set as a keyword for the PDF file.
5.11 Editing the Scanned Data in the Scan Viewer
283).
314