Miscellaneous Programming; Consecutive Receipt Number Programming - Sharp XE-A101 Instruction Manual

A101_01(E) 03.9.12 7:28 AM

Miscellaneous Programming

You can program miscellaneous settings suitable for use.
1 ➜ S
Parameters:
A Date format
B Time format
C Decimal point position for domestic currency
D Resetting receipt no. when issuing Z report No*
Amount tendered compulsory for t
E
and C
F Subtotaling compulsory
Entry digit limit for R , C , V and p
C
H Rounding
• Time format
When 12 hour format is set, the a.m. time will be displayed with
and the p.m. time will be displayed with
• Amount tendered compulsory
When set for compulsory, always enter the amount tendered by the customer before finalizing the
transaction.
• Subtotaling compulsory
When set for compulsory, always press S before finalizing the transaction.

Consecutive Receipt Number Programming

The receipt number is printed on every receipt or journal, and report, together with the date and
time. The number is incremented each time a receipt is issued. To start from a specific
consecutive number, enter a figure one less than that number.
Receipt start number (max. 4 digits) ➜
Page 19
➜ ABCDEFGH ➜ S
(➜
and printed with the mark @.
x
Programming
S
)
Selection: Entry:
MMDDYY 0
DDMMYY* 1
YYMMDD 2
12 hour format 0
24 hour format* 1
0 though 3 (Default: 2)
0
Yes 1
No* 0
Yes 1
No* 0
Yes 1
0 though 8 (Default: 8)
Round off* 0
Round up 1
Round down 2
and printed without no mark,
➜ S S
(➜ )
(Default: 0001)
19