Spirit XE195 Owner's Manual page 9

STEP 3: Connecting Arm
1. Untie the twist tie that holds each bushing to the Connecting Arm end. Align the hole in the
end of the Connecting Arms (L & R) (8 & 9) with the hole in the bracket of the Swing Arms (L)
and (R), (10 & 11).The Connecting Arm ends should be inside of the Swing Arm (L) and (R),
(10 & 11) brackets. Slide a Hex Head Bolt (101) through each Swing Arm (L) and (R), (10
&11) bracket and each Connecting Arm end.
2. Slide a Flat Washer (142) onto each bolt, then fasten the arms together by tightening a
Nyloc Nut (192) to each bolt using the Wrenches provided
HARDWARE
#142. 5/16" × 20 × 1.5T
Flat Washer (2 pcs)
#192. 5/16" × 9T
Nyloc Nut (2 pcs)
9
(155 & 158).
#101. 5/16" × 1-1/4"
Hex Head Bolt (2 pcs)