Spirit XE195 Owner's Manual page 8

STEP 2: Swing Arms
1. Slide two Wave Washers (150) onto both the Left and Right Console Mast axle.
2. Slide the Swing Arms (L) and (R), (10 & 11) onto the appropriate side of the axle.
NOTE: Make sure the arms are attached as shown in the illustration.
3. Place a Flat Washer (141) onto each Hex Head Bolt (99) and fasten in the end of the left
and right axle. Tighten with the wrench (155).
HARDWARE
#150. Ø 17 m/m
Wavy Washer (4 pcs)
#141. 5/16" × 23 × 1.5T
Flat Washer (2 pcs)
8
#99. 5/16" × 15mm
Hex Head Bolt (2 pcs)