Advertisement
Using Focl-Type Cleaner on Fabric
1. Vacuum and brush the
area to
remove any
loose dirt.
2. Always clean a whole- trim panel or section. Mask
3. Mi-x Muid-Purpose Powdered
Cleaner- following, the
4. Use suds only and apply with a clean sponge. Don't
5. As- soon as you've cleaned the section, use-a sponge
surromdiirrg.trim along stitch or welt lines..
directions
on
the container label.
saturate the mater'ial and do.n't .rub it roughly.
to
remove the suds.
6.
Rinse the
section
with
. a -
cletin, wet sponge.
7. Wipe off what's left with
a slightly damp paper mwel
8.
D r y
it immediately with
-
,tow dryer.
or cl.oth.
9. Wipe with a dean cloth.
Using Solvent-Qpe
Cleaner on Fa'
First, see if you have to use solve,nt-type
cle
at all.
Some spots and stains will clean
off
better w m Just
water and mild. soap.
'If you need
to use
a.solvent:
1. Gently scrape excess soil from -the trim-material with
-
-
.
.
a clean, dull knife or scraper.
2 . Use ve1.y little cledner, li-ght pressure arid clean cloths
(preferably cheeseclo.th). Cleanirig- should start a t the
outside
of the stain, "feathering" toward
.the center.
3. Keep changing to a clean section of the cloch.
,4. When
you clean a stain from fabric, imme.diately dry the
area with a blow dryer to help prevent a cleaning Ang.
Fabric Protection
Your vehicle has upholstery and carpet that has been
'treated with Scotchgard
TM
Fabric Protector' a 3M
product. It protects fabrics- by repelling oil
and
water,
which
:are .the c,arriefs of nio$t
staihs.
Even with this
protection, you still ,nee:d to. clean your upholstery and
carpet. often to keep it I-0-aking new.
.Further information an cleaning
i s
available by calling
1-800-433-3296 (in Minnesota,
'I
-800-442-6167).
Advertisement
