Advertisement
Before
cJosing
the hood, he .sure- all the
filler caps are on
properly. Thin lift
the hood to.
relieve pressure !on
the
hood prop.
Remove: the
hood prop:
from the slot in the hood and
return the prop to
Z t s
reta.iner.
Then pull the hood down firmly to close. It wdl Iatch
when dropped from 10 to
1.<2
inches (25
to-
SO
cm)
without.pressing
on
th.e b o d -
It's a good idea to
Cheek
your- engine 'oil-every time :you
get fuel.
In order
to
get
an accurate reading, the. o.iI must
.be warm and th.e vehicle
'mu.st
be an level
ground.
The oil dipstick ,on the
"VORTEC"4300eng~,eis
a yellow ring.
6-10
Advertisement
