Advertisement
5. Turn the. bulb
countercl.ockrwise to
remove it.
6. .Put-the
new bulb into theheadlamp lens ass-ernbiy
7.
PhLg
in
the
e1ectric.al connector.
and
turn
it
clockwise until
it
is tight.
8. P.ut the headlamp 1-ens assembly back into t.he
ve:hicle. Insrall and tighten the screws.
Front Turn Signal Lamps
If you. have fog.lamps, the fog lalizp bracket
rnusE.De
&H6v'ed
before you can rep1ac.e the front parking/!turn signal limps.
1,
Rea.ch under the bumper and behind the parkin,g/turn
2. Push
the
tab on the socket, turn the socket
3. Holding
the base of the bulb, pull
the
bulb straight
signal lamp assembly.
counterclockwise and pull it out,
out of
the
socket.
4. Push the new bu1b.int.o the socket until it clicks.
5. Put the socket-back into lhe parkinghrn signal lamp
assembly and turn it clockwise until it locks into place.
Advertisement
