Restore To Factory Defaults; Reboot - ZyXEL Communications ARMOR X1 User Manual

14.5.3 Restore to Factory Defaults

Click Reset to clear all user-entered configuration information and returns the WAP6806 to its
factory defaults.
You can also press the Reset button on the rear panel to reset the factory defaults of your
WAP6806.

14.6 Reboot

System reboot allows you to restart the WAP6806 without turning the power off. Click
Maintenance > Reboot to open the following screen.
Figure 68 Maintenance > Reboot
Click Restart to have the WAP6806 reboot. This does not affect the WAP6806's configuration.
Chapter 14 Maintenance
WAP6806 User's Guide
82