Table of Contents
Advertisement
10.1 Overview
This chapter provides information on the Operation Mode screens.
10.2 What You Can Do
• Use the Operation Mode screen
WAP6806.
• Use the AP Connection screen
configure the AP connection settings.
10.3 Operation Mode Setup
Use this screen to configure the system operation mode. Click Configuration > Operation Mode
> Operation Mode Setup. The following screen displays.
Figure 38 Configuration > Operation Mode > Operation Mode Setup
The following table describes the labels in this screen.
Table 18 Configuration > Operation Mode > Operation Mode Setup
LABEL
Operation Mode
C
(Section 10.3 on page
(Section 10.4 on page
DESCRIPTION
Select the system operation mode you want to use.
•
Select AP Mode to have your device bridge traffic between clients on the same
network.
•
Select Client Mode to have your device act as a wireless client to connect to an
existing access point. See
•
Select Repeater Mode if you want to have wireless clients associate with the
WAP6806 and also want to connect the WAP6806 to an existing access point. See
Section 10.3.2 on page 53
WAP6806 User's Guide
52
HAPTER
Operation Mode
52) to select how you want to use your
55) to view the AP connection status and
Section 10.3.1 on page 53
for more details.
for more details.
1 0
Hide quick links:
Advertisement
Table of Contents
