Export Setting; Import Setting - ZyXEL Communications ARMOR X1 User Manual

Figure 66 Maintenance > Backup/Restore

14.5.1 Export Setting

Export setting allows you to back up (save) the WAP6806's current configuration to a file on your
computer. Once your WAP6806 is configured and functioning properly, it is highly recommended
that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Click Export to save the WAP6806's current configuration to your computer.

14.5.2 Import Setting

Import setting allows you to upload a new or previously saved configuration file from your
computer to your WAP6806.
Table 36 Maintenance Restore Configuration
LABEL
Browse...
Import
Note: Do not turn off the WAP6806 while configuration file import is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute before
logging into the WAP6806 again.
The WAP6806 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 67 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default WAP6806 IP address (192.168.1.2). Refer
to your operating system's help files for details on how to set up your computer's IP address.
Chapter 14 Maintenance
DESCRIPTION
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click Import to begin the import process.
WAP6806 User's Guide
81