Table of Contents
Advertisement
Install the Rear Door
To install the rear door, do the following (refer to the illustration on page 18):
1. Position the door so that both the top and the bottom hinge pins (1) partially engage the hinges.
2. Simultaneously slide the top and bottom hinge pins on the rear door into the top and bottom hinges (2)
on the rack.
3. Close the rear door, and engage the latch on the left side of the door.
1
4
1
2
1 Hinge Pin (Typical Front and Rear Door)
2 Rack Hinge (Typical Front and Rear
Door)
Proceed to Verifying the Hardware Operation
Proceed to Chapter 3, "Verifying the Hardware Operation", on page 19.
18
Eserver pSeries 670 Installation Guide
2
2
2
3
1
1
3 Front Door
4 Rear Door
Advertisement
Table of Contents
