2
Shipping bar (upper)
3
Shipping bar (lower)
5
Hinge Plate
6
EQ Support
Determine Your Next Step
Use the following to determine your next step:
v If the rack is being attached to a concrete (non-raised) floor, proceed to "Attach the Rack to a Concrete
(Non-Raised) Floor" on page 45.
v If the rack is being attached to a raised floor, proceed to "Attaching the Rack to a Short-Raised or
Long-Raised Floor" on page 48.
v If the rack is not being attached to the floor, proceed to "Step 3. Position and Level the Rack" on
page 10.
44
Eserver pSeries 670 Installation Guide
8
Latch Plate
9
Screw (hex, 25mm, long, hinge)
10
Washer (M 8, hinge)