Table of Contents
Advertisement
Using this unit
You can tune in to a station using PTY (program
type) information.
1 Press M.C. to display the setting mode.
2 Turn LEVER left or right to select the desired
setting.
News&Inf—Popular—Classics—Others
3 Press M.C. to begin the search.
The unit searches for a station broadcasting
that type of program. When a station is found,
its program service name is displayed.
! To cancel the search, press M.C. again.
! The program of some stations may differ
from that indicated by the transmitted PTY.
! If no station is broadcasting the type of pro-
gram you searched for, Not found is dis-
played for about two seconds and then the
tuner returns to the original station.
Traffic Announce (traffic announcement standby)
1 Press M.C. to turn traffic announcement
standby on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the
unit automatically searches for a different station
in the same network.
1 Press M.C. to turn the alternative frequencies
search on or off.
News interrupt (news program interruption)
1 Press M.C. to turn the NEWS function on or
off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the
unit.
Select Manual (manual tuning) to tune up or
down manually or select Preset (preset channel)
to switch between preset channels.
1 Press M.C. to select Manual or Preset.
CD/CD-R/CD-RW and external
storage devices (USB, SD)
Basic operations
DEH-X9650BT/DEH-X8650BT
1
2
3
4
5
6
7
DEH-X9650SD/DEH-X7650SD
1
2
3
4
6
7
5
1 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, depend-
ing on the software used to decode AAC
files, VBR may be displayed.
2 Folder number indicator
Shows the current folder number when play-
ing a compressed audio file.
3 Track number indicator
4 PLAY/PAUSE indicator
5 S.Rtrv indicator
Appears when Sound Retriever function is
on.
6 Song time (progress bar)
7 Play time indicator
Using this unit
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Plug in the USB storage device using the USB
cable.
! Use a Pioneer USB cable to connect the USB
storage device to the unit.
Stopping playback of files on a USB storage de-
vice
1 Disconnect the USB storage device.
Playing songs on an SD memory card
1 Insert an SD memory card into the SD card
slot.
Insert it with the contact surface facing down,
and press on the card until it clicks and com-
pletely locks into place.
2 Press SRC/OFF to select SD as the source.
Stopping playback of files on an SD memory card
1 Press on the SD memory card until it clicks.
The SD memory card is ejected.
2 Pull out the SD memory card.
Selecting a folder
1 Press UP or DOWN.
Selecting a track
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
! When playing compressed audio, there is no
sound during fast forward or reverse.
Returning to root folder
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different
memory devices.
MTP connection
MTP-compatible Android devices (running
Android OS 4.0 or higher) can be connected by
MTP connection using the USB source. To con-
nect an Android device, use the cable that came
with the device.
! This function is not compatible with MIXTRAX.
! This function is not compatible with WAV.
! This function is not compatible with music
browse.
Notes
! Disconnect USB storage devices from the
unit when not in use.
! If there are two USB storage devices con-
nected to this unit, the device connected to
the input of the selected source is the one
that is operated.
! Disconnect communications for the USB
storage device before switching to operation
of the other device.
Operations using the MIXTRAX
button
Turning MIXTRAX on or off
You can use this function when USB or SD is se-
lected as the source.
You cannot use this function with USB MTP.
1 Press MIX/DISP OFF to turn MIXTRAX on or
off.
! For more details about MIXTRAX, refer to
About MIXTRAX on page 17.
Section
02
7
En
Hide quick links:
Advertisement
Table of Contents
