Cd/Cd-R/Cd-Rw And External Storage Devices (Usb, Sd) - Pioneer DEH-X8580BT Owner's Manual

Cd rds receiver
Table of Contents

Advertisement

Available languages

Available languages

Using this unit
CD/CD-R/CD-RW and external
You can tune in to a station using PTY (program
storage devices (USB, SD)
type) information.
1 Turn LEVER left or right to select the desired
Basic operations
setting.
News&Inf Popular Classics Others
2 Press M.C. to begin the search.
The unit searches for a station broadcasting
that type of program. When a station is found,
its program service name is displayed.
PTY (program type ID code) information is
listed in the following section. Refer to PTY list
on the previous page.
To cancel the search, press M.C. again.
1 Bit rate/sampling frequency indicator
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of pro-
gram you searched for, Not found is displayed
for about two seconds and then the tuner re-
turns to the original station.
Traffic Announce (traffic announcement standby)
1 Press M.C. to turn traffic announcement
2 Folder number indicator
standby on or off.
Alternative FREQ (alternative frequencies search)
3 Track number indicator
When the tuner cannot get a good reception, the
4 PLAY/PAUSE indicator
unit automatically searches for a different station
5 S.Rtrv indicator
in the same network.
1 Press M.C. to turn the alternative frequencies
search on or off.
6 Song time (progress bar)
7 Play time indicator
News interrupt (news program interruption)
1 Press M.C. to turn the NEWS function on or
off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the
unit.
Select Manual (manual tuning) to tune up or
down manually or select Preset (preset channel)
to switch between preset channels.
1 Press M.C. to select Manual or Preset.
1
2
3
4
5
6
7
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, depend-
ing on the software used to decode AAC
files, VBR may be displayed.
Shows the current folder number when play-
ing a compressed audio file.
Appears when Sound Retriever function is
on.
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Use a Pioneer USB cable to connect the USB
storage device to the unit.
! Plug in the USB storage device using the USB
cable.
Using this unit
Notes
Stopping playback of files on a USB storage de-
! When playing compressed audio, there is no
vice
! You may disconnect the USB storage device at
! Disconnect USB storage devices from the
any time.
Playing songs on an SD memory card
1 Remove the front panel.
Operations using the MIXTRAX
2 Insert an SD memory card into the SD card
button
slot.
Insert it with the contact surface facing down,
Turning MIXTRAX on or off
and press on the card until it clicks and com-
You can use this function when USB or SD is se-
pletely locks into place.
lected as the source.
3 Re-attach the front panel.
1 Press MIX/DISP OFF to turn MIXTRAX on or
4 Press SRC/OFF to select SD as the source.
Playback will start.
! For more details about MIXTRAX, refer to
Stopping playback of files on an SD memory card
1 Remove the front panel.
! For more details about MIXTRAX functions,
2 Press on the SD memory card until it clicks.
The SD memory card is ejected.
3 Pull out the SD memory card.
Switching the display
4 Re-attach the front panel.
Selecting the desired text information
Selecting a folder
1 Press
or
.
% Press
Selecting a track
Notes
1 Turn LEVER.
! Depending on the version of iTunes used to
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Returning to root folder
! Text information items that can be changed
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Selecting and playing files/
tracks from the name list
Switching between playback memory devices
You can switch between playback memory devices
This function is available when OFF is selected
on USB storage devices with more than one Mass
in Music browse. For details, refer to
Storage Device-compatible memory device.
Music browse (music browse) on page 18.
1 Press BAND/ .
! You can switch between up to 32 different
1
memory devices.
name list mode.
Section
02
sound during fast forward or reverse.
unit when not in use.
off.
About MIXTRAX on page 17.
refer to MIXTRAX menu on page 17.
/DISP.
write MP3 files to a disc or media file types,
incompatible text stored within an audio file
may be displayed incorrectly.
depend on the media.
Press
(list) to switch to the file/track
9
En

Advertisement

Table of Contents
loading

Table of Contents