JVC MX-G500 Service Manual page 17

< Speaker section >
It is exchange in a unit.
Please do not decompose as much as possible.
Removing the side panel
1. Remove the five screws A attaching the side panel
and remove the side panel.
NOTES : It will be good to use the tool with a flat tip, since a
boss's portion is pasted with adhesives. Please take care not to
damage the cabinet at this time.
Removing the side speaker
Prior to performing the following procedure, remove
the side panel.
1. Remove the four screws B attaching the side
speaker.
2. Pull out the side speaker and remove the speaker
cord from the speaker terminal.
(See Fig. 1)
(See Fig. 2 and 3)
Side speaker
A
(long wood screw)
A
(short wood screw)
Side panel
Fig.1
Side speaker
B
Fig.2
Fig.3
MX-G500
Boss and adhesion
A(long screw)
Boss and
adhesion
Front panel
Speaker terminal
1-17