Beep After Good Decode
Scan a bar code below to select whether or not the scanner beeps after a good decode. If Do Not Beep After
Good Decode is selected, the beeper still operates during parameter menu scanning and indicates error
conditions.
*
Beep After Good Decode
(Enable)
Transmit Code ID Character
A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is
decoding more than one code type. In addition to any single character prefix already selected, the Code ID
character is inserted between the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters,
see
Symbol Code Characters on page B-1
Symbol Code ID Character
*
None
Do Not Beep After Good Decode
and
Aim Code Characters on page
User Preferences
(Disable)
B-2.
AIM Code ID Character
4 - 7