Code 39 Full Ascii Conversion; Code 39 Buffering (Scan & Store) - Motorola Symbol LS1203 Product Reference Manual

8 - 24 Symbol LS1203 Product Reference Guide

Code 39 Full ASCII Conversion

Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable
or disable Code 39 Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent and is described in the ASCII
Character Set table for the appropriate interface. See
page 5-12,
7-11 for the appropriate interface.
Code 39 Buffering (Scan & Store)
This feature allows the scanner to accumulate data from multiple Code 39 symbols.
Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading
space as a first character for later transmission. The leading space is not buffered.
Decode of a valid Code 39 symbol with no leading space causes transmission in sequence of all buffered data in a
first-in first-out format, plus transmission of the "triggering" symbol. See the following pages for further details.
When the Do Not Buffer Code 39 option is selected, all decoded Code 39 symbols are transmitted immediately
without being stored in the buffer.
ASCII Character Set for RS-232 on page 6-17
*
Disable Code 39 Full ASCII
ASCII Character Set for Keyboard Wedge on
and ASCII Character Set for USB on page