Upc-E1 Preamble; Convert Upc-E To Upc-A - Motorola Symbol LS1203 Product Reference Manual

UPC-E1 Preamble

Preamble characters are part of the UPC symbol consisting of Country Code and System Character. Three options
are given for transmitting UPC-E1 preamble to the host device: transmit System Character only, transmit System
Character and Country Code ("0" for USA), and no preamble transmitted. Scan a bar code below to match the host
system.
No Preamble
(<DATA>)
System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER>
<DATA>)

Convert UPC-E to UPC-A

Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After
conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble,
Check Digit).
When disabled, UPC-E decoded data is transmitted as UPC-E data, without conversion.
*
Do Not Convert UPC-E to UPC-A
(Disable)
*
System Character
(<SYSTEM CHARACTER> <DATA>)
Convert UPC-E to UPC-A
(Enable)
Symbologies 8 - 15