Beeper Definitions - Motorola Symbol LS1203 Product Reference Manual

2 - 2 Symbol LS1203 Product Reference Guide

Beeper Definitions

The scanner issues different beep sequences and patterns to indicate status.
that occur during both normal scanning and while programming the scanner.
Beeper Definitions
Table 2-1
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beeps
4 long low beeps
5 low beeps
Low/high/low beeps
High/high/high/low beeps
Parameter Menu Scanning
Short high beeps
Low/high beeps
High/low beeps
High/low/high/low beeps
Low/high/low/high beeps
Code 39 Buffering
High/low beeps
3 Beeps - long high beeps
Low/high/low beeps
Low/high beeps
Table 2-1
Indication
Power up.
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error was detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly
configured. Check option setting.
Conversion or format error.
Advanced Data Formatting (ADF) transmit error. (For
information about ADF programming, refer to the Advanced
Data Formatting Programmer Guide, p/n 72-69680-xx.)
RS-232 receive error.
Correct entry scanned or correct menu sequence performed.
Input error, incorrect bar code or "Cancel" scanned, wrong
entry, incorrect bar code programming sequence; remain in
program mode.
Keyboard parameter selected. Enter value using bar code
keypad.
Successful program exit with change in the parameter
setting.
Out of host parameter storage space. Scan
Parameters on page 4-3.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there was an attempt to
clear or transmit an empty buffer.
A successful transmission of buffered data.
defines beep sequences
Default