Table of Contents
Advertisement
For Recording Timer:
Connect a transferable USB device
to the
7
Press to turn off the system.
To check the timer setting or
activate the timer again
1
Hold down SHIFT, then press TIMER
MENU.
"TIMERSEL" flashes in the display
panel.
2
Press
3
Press
/
"PLAY SEL" or "REC SEL", then press
.
To cancel the timer
Repeat the same procedure as above
and select "OFF" in step 3, then press
.
Notes
The system turns on before the preset
time. If the system is turned on at the
preset time or if "STANDBY" flashes in
the display panel, the Play Timer and the
Recording Timer will not play or transfer.
Do not operate the system from the time
the system turns on until the playback or
transfer starts.
Using optional
equipment
1
Press
MIN" appears in the display panel.
2
Connect an optional equipment
(page 20).
3
Press FUNCTION +/– repeatedly to
select the function which
corresponds to the connected
equipment.
50
GB
(USB) port.
.
repeatedly to select
– repeatedly until "VOL
4
Start playing the connected
equipment.
5
Press
+ repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment. To
turn off automatic standby function, see
"Setting the automatic standby function"
(page 51).
Deactivating the
buttons on the
subwoofer
(Child Lock)
You can deactivate the buttons on the
subwoofer (except ) to prevent
misoperation, such as child mischief.
Hold down on the subwoofer for
more than 5 seconds.
"CHILD LOCK ON" appears in the
display panel.
You can only operate the system using
the buttons on the remote control.
To cancel, hold down on the
subwoofer for more than 5 seconds
until "CHILD LOCK OFF" appears in the
display panel.
Notes
Child Lock function will be canceled
when you disconnect the AC power cord
(mains lead).
Child Lock function cannot be activated
when you open the disc tray.
Hide quick links:
Advertisement
Table of Contents
