Sony MHC-GT3D Operating Instructions Manual page 41

Notes

You can pair up to 9 BLUETOOTH
devices. If the 10th BLUETOOTH device is
paired, the oldest paired device will be
deleted.

If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel pairing operation
Hold down PAIRING on the subwoofer
for 2 seconds or more until "BT AUDIO"
appears in the display panel.
Playing music from a
BLUETOOTH device
You can operate a BLUETOOTH device
by connecting the system and the
BLUETOOTH device using AVRCP.
Once the system and BLUETOOTH
device is connected, you can control
playback by pressing , , ,
/ and /.
Check the following before playing
music:
 The BLUETOOTH function of the
BLUETOOTH device is turned on.
 The pairing has been completed
(page 40).
1
Press BLUETOOTH on the
subwoofer to select BLUETOOTH
function.
"BT AUDIO" appears in the display
panel.
2
Establish connection with the
BLUETOOTH device.
Press BLUETOOTH on the
subwoofer to connect to the last
connected BLUETOOTH device.
Perform the BLUETOOTH
connection from the BLUETOOTH
device if the device is not
connected.
Once the connection is established,
the BLUETOOTH device name
appears in the display panel.
3
Press  to start playback.
Depending on the BLUETOOTH
device,
 you may have to press  twice.
 you may need to start playing an
audio source on the BLUETOOTH
device.
4
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first, if the
volume level is still too low, adjust
the volume level on the system.
Notes

When the system is not connected to
any BLUETOOTH device, the system will
connect to the last connected
BLUETOOTH device automatically when
you press BLUETOOTH on the subwoofer
or .

If you try to connect another
BLUETOOTH device to the system, the
current connected BLUETOOTH device
will be disconnected.
To disconnect the BLUETOOTH
device
Press BLUETOOTH on the subwoofer.
"BT AUDIO" appears in the display
panel.
Depending on the BLUETOOTH device,
the BLUETOOTH connection may be
canceled automatically when you stop
playback.
To delete pairing information
Use the buttons on the subwoofer to
perform this operation.
1
Press BLUETOOTH to select
BLUETOOTH function.
"BT AUDIO" appears in the display
panel.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears in the display
panel. Press BLUETOOTH to
disconnect the BLUETOOTH device.
41 GB