Sony MHC-GT3D Operating Instructions Manual page 12

Speaker System
  (on/standby)
Turns on the system, or sets it to
standby mode.
 PARTY LIGHT (page 49)
  (play)
Starts playback.
Hold down  on the subwoofer
for more than 2 seconds, the built-
in sound demonstration will be
played back on the system. Press
 to stop the demonstration.
 (stop)
Stops playback.
Press twice to cancel resume
playback.
 BLUETOOTH
Press to select BLUETOOTH
function.
PAIRING
Hold down to activate
BLUETOOTH pairing during
BLUETOOTH function.
BLUETOOTH indicator (page 40,
42)
MEGA BASS (page 44)
MEGA BASS indicator (page 44)
 FUNCTION*
SOUND FIELD*
* Press this button, then turn the
MULTI CONTROL knob to select the
function or sound field you want,
then press ENTER.
LIGHT MODE (page 49)
ENTER
Enters the settings.
12 GB
MULTI CONTROL
Selects a FUNCTION, SOUND FIELD
or LIGHT MODE.
 PARTY CHAIN (page 47, 48, 57)
 FLANGER, ISOLATOR, SAMPLER,
DJ OFF (page 46)
 REC TO USB
Transfers music to the USB device
which is connected to the
port.

(USB) (REC/PLAY) port
Connects a USB device.
 MIC 1/2 jack
Connects the microphone(s).
VOCAL FADER (page 48)
MIC ECHO (page 48)
MIC LEVEL (MIN/MAX)
Adjusts the microphone volume.
Microphone volume range
 VOLUME/DJ CONTROL
Adjusts the volume.*
Adjusts the FLANGER and
ISOLATOR effect or outputs the
SAMPLER sound effect
continuously (page 45).
* You cannot use this knob to adjust
the volume when DJ EFFECT or
SAMPLER is selected.
(USB)