English
Balancing the
Trimmer/Brushcutter
Attaching the unit to the harness
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
32
Loosen the screw (3).
N
Balancing the brushcutter
The unit is balanced differently,
depending on the cutting attachment
used.
Proceed as follows until the conditions
specified under "Floating positions"
have been met:
Adjust the carrying ring.
N
Tighten the screw moderately.
N
Allow the unit to hang freely.
N
Check the position obtained.
N
Floating positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
should just touch the ground.
N
B
Circular saw blades (B)
should "hover" about 8 in. (20 cm)
N
above the ground.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
FS 130, FS 130 R
A