Table of Contents
Advertisement
Warning! Improper use of a brush knife
may cause it to crack, chip or shatter.
Thrown parts may injure the operator or
bystanders.
To reduce the risk of personal injury it is
essential to take the following
precautions:
–
Avoid contact with stones, rocks,
pieces of metal and other solid
foreign objects.
–
Never cut wood or shrubs with a
stem diameter of more than 2 cm.
–
Inspect the brush knife at regular
short intervals for signs of damage.
Do not continue working with a
damaged brush knife
–
Resharpen the brush knife regularly
(when it has dulled noticeably) and
have it balanced if necessary (by
servicing dealer).
FR 350, FR 450, FR 480
Assembling the
Brushcutter
4
3
2
1
Mounting the Support Frame
:
Loosen and remove the M 10 x 40
screw (1) with lock washer (2) and
plain washer (3) from the
powerhead (4).
:
Secure the support frame (5) to the
powerhead with the screw, lock
washer and plain washer (torque
down to 20 Nm).
5
Installing the Flexible Shaft
:
Remove the protective cap from
one end of the shaft.
:
Push the end of the flexible shaft (1)
into the sleeve (2) until it engages –
turn shaft back and forth at the
same time.
:
Remove the protective cap from the
other end of the shaft.
:
Push the end of the flexible shaft
into the powerhead coupling (3)
until it engages – turn the shaft back
and forth at the same time.
:
Keep the protective caps in a safe
place.
English
1
1
2
3
13
Advertisement
Table of Contents
