Adjusting The Trimmer / Brushcutter; Balancing The Trimmer / Brushcutter; Inserting And Removing The Connecting Cord; Inserting The Connecting Cord - Stihl FSA 130 R Instruction Manual

English
2
► Adjust the length of the hip pad strap (1) so that the
carabiner (2) is about a hand's width below the top of your
hip.
► Attach the carabiner to the carrying ring (3) on the power
tool's shaft.

13 Adjusting the Trimmer / Brushcutter

13.1 Balancing the Trimmer / Brushcutter

► Let the trimmer / brushcutter sway on the harness until it
stops moving.
The mowing head or the metal cutting attachment should
come to rest gently on the ground or just above the ground.
40
2
3
1
1
If the mowing head or the metal cutting attachment will not
rest gently on or just above the ground:
► Loosen the screw on the carrying ring (2).
► Slide the carrying ring (1) along the drive tube and re-
tighten the screw.
► Allow the trimmer / brushcutter to hang freely again.
Repeat and re-adjust as necessary to achieve the proper
balance.
► Once the cutting attachment is properly positioned for
work, tighten the screw firmly and ensure that the carrying
ring is secure.
14 Inserting and Removing the
Connecting Cord

14.1 Inserting the Connecting Cord

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 7.
13 Adjusting the Trimmer / Brushcutter
1
2
0458-725-8621-B