Fitting The Harness - Stihl FS 130 Instruction Manual

Closing the threaded filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
FS 130, FS 130 R

Fitting the Harness

The type and style of the harness
depend on the market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the brushcutter.
N
Full harness
1
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the spring hook (2) is about a hand's
width below your right hip.
Balance the trimmer/brushcutter.
N
English
31