Delay Setting; Set The Low-Cut Filter - Tascam dr-44wl Reference Manual

4 – Recording

DELAY setting

Correct a time delay that occurs when the built-in microphones
are far away from an external microphone.
1. Press the INPUT button to show the
screen.
2. Press a TRACK/INPUT button to open the
screen for that channel (track) to set its
SETTING
item.
DELAY
3. Using the wheel select (highlight)
ENTER/MARK or / button.
screen Tr1 display when in 4CH mode
INPUT SETTING
4. Use the wheel to set a value according to the distance of the
connected microphone.
Options: (default value) to
0ms (0m)
(103m)
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
22
TASCAM DR-44WL
INPUT SETTING
INPUT
and press the
DELAY
300ms

Set the low-cut filter

The low-cut filter can reduce noise such as offensive wind noise
from air-conditioners and projectors.
1. Press the INPUT button to show the
screen.
2. Press a TRACK/INPUT button to open the
screen for that channel (track) to set its
SETTING
low-cut filter.
3. Using the wheel select (highlight)
ENTER/MARK or / button.
screen Tr1 display when in 4CH mode
INPUT SETTING
4. Use the wheel to set the cut-off frequency of the low-cut
filter.
Options: (default value),
OFF
220Hz
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
NOTE
can be set or changed even during recording
LOW CUT
standby.
INPUT SETTING
INPUT
and press the
LOW CUT
, , ,
40Hz 80Hz 120Hz