10 - Useful Functions; Tuner Function (Compatible With V1.10); Chromatic Tuner; Oscillator Mode - Tascam dr-44wl Reference Manual

Tuner function (compatible with
V1.10)
A guitar and wind instruments can be tuned using a built-in

chromatic tuner.

The tuner incorporated into this unit has chromatic tuner mode
that allows tuning of musical instruments while looking at
the tuning meter and oscillator mode that outputs reference
sounds.
Chromatic tuner
1. Connect a guitar or bass to the EXT MIC/LINE IN 1/L or 2/R
jack.
Tune wind instruments using the built-in microphone.
2. Press the MENU button to open the
3. Using the wheel, select (highlight)
ENTER/MARK or / button.
screen appears.
TOOLS
4. Use the wheel to select
TUNER
MARK or / button.
appears selected for the
Exec
5. Press the ENTER/MARK button to open the
screen.
6. Use the wheel to select
MODE
button.
7. Use the wheel to set the tuner mode to
Options:
CHROMATIC
8. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
9. Use the wheel to select
CALIB
MARK button.
10. Use the wheel to set the standard frequency of A4.
Range: –
435Hz 445Hz
11. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
12. Use the wheel to select
SOURCE
MARK button.
13. Use the wheel to set the input for the sound to be tuned.
Options Input destination
INT L Input from right front side of built-in
(default) stereo mic
Input from left back side of built-in
INT R
stereo mic
EXT 1 Input from EXT MIC/LINE IN 1/L jack
Input from EXT MIC/LINE IN 2/R jack
EXT 2
14. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
screen.
MENU
and press the
TOOLS
and press the ENTER/
item.
TUNER
TUNER
and press the ENTER/MARK
.
CHROMATIC
(default value) , .
OSC
and press the ENTER/
(default: )
440Hz
and press the ENTER/
10 – Useful functions
15. Perform tuning by playing a musical instrument.
The note that is closest to the sound you played is shown at
the top of the tuning meter.
Tune the musical instrument so that the note you want to
match is shown and the center of the tuning meter lights up.
A bar appears on the left or right of the center if the sound
is lower or higher than the target pitch. The bar becomes
longer as the sound shifts away from the target pitch.
When the sound played matches the note exactly, tg on
the right and left of the note lights up.
16. Once tuning has been completed, press 8/HOME button to
return to the Home screen.

Oscillator mode

1. Press the MENU button to open the
2. Using the wheel, select (highlight)
ENTER/MARK or / button.
screen appears.
TOOLS
3. Use the wheel to select
TUNER
MARK or / button.
appears selected for the
Exec
4. Press the ENTER/MARK button to open the
screen.
5. Use the wheel to select
MODE
button.
6. Use the wheel to set the tuner mode to
Options:
CHROMATIC
7. Press ENTER/MARK button to change the
to the oscillator mode display.
The following settings can be made in the oscillator mode
display.
NOTE
Set the sound to output.
The setting range is from
LEVEL
Set the output level.
The setting range is from
(maximum). (default value:
8. Use the wheel and ENTER/MARK button to set
.
LEVEL
9. Use the wheel and ENTER/MARK button to set
so that reference sound is output.
ON
screen.
MENU
and press the
TOOLS
and press the ENTER/
item.
TUNER
TUNER
and press the ENTER/MARK
.
OSC
(default value) , .
OSC
screen
TUNER
to . (default value:
C3 B5 A4
(minimum) to
0 100
)
70
and
NOTE
SOUND
47
TASCAM DR-44WL
)
to