Y Programming Using The Handset; Programmable Settings - Panasonic KX-TGP500 User Manual
Sip cordless phone
Hide thumbs
Also See for KX-TGP500:
- Administrator's manual (284 pages) ,
- User manual (67 pages) ,
- Quick start manual (30 pages)
Table of Contents
Advertisement
Programmable settings
You can customise the unit by programming the following features.
To access the features, there are 2 methods:
- scrolling through the display menus (page 27)
- using the direct commands (page 28)
Some of the features can be programmed through the Web user interface (page 41).
L Direct command is the main method used in this User Guide.
Programming by scrolling through the display menus
1
{MENU} (centre of joystick)
2
Select the desired main menu by pushing the joystick in any direction. i {SELECT}
3
Push the joystick down or up to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4
Push the joystick down or up to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 28 for the default settings.
L In the following table, ( ) indicates lines you need to select for the settings.
Main menu
Line Status
m
IP Service
New Voice Mail
#
Intercom
x
Sub-menu 1
-
Network Setting
Call Features
-
-
Document Version 2012-08
Programming using the Handset
Y
Sub-menu 2
*1, *2
(Line 1: 8 max.)
*1
- Busy
- No Answer
(Line 1: 8 max.)
(Line 1: 8 max.)
Block Caller ID
(Line 1: 8 max.)
*1, *2
Settings
Repeater Mode
Page
-
11
*1, *2
41
30
*1
*1
*1
31
*1
31
*1
32
41
*1
43
-
46
-
47, 48
-
-
27
Advertisement
Table of Contents
