Belt Clip & Optional Headset - AT&T EP5995 User Manual

Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap the belt clip into the notches on
the side of the handset. Rotate and pull
to remove.
For hands-free telephone
conversations, use any
industry standard 2.5 mm
headset (purchased sepa-
rately). For best result, use
an AT&T 2.5 mm headset.
Plug the 2.5 mm head-
set into the jack on the
side of the handset
(beneath the small rub-
ber cap).
FLASH CANCEL
10