Replacing A Handset - AT&T EP5995 User Manual

Appendix

Replacing a handset

If you are replacing a handset on a system that has the maximum number of
registered handsets (eight) or wish to change the assigned handset number of
your registered handsets, you must first de-register the handsets, and then re-
register all handsets again.
De-registering a handset
A handset must be de-registered first before it can be registered to another
telephone base. To de-register a handset, perform the following procedures on
the handset:
• Press the
CENTER
• Press the or
UP DOWN
• Press the
CENTER
• Press the NavKey
UP
delete registration.
• Press the
CENTER
for handset de-registration.
• Press the softkey
YES
• After pressing the softkey
• When the screen shows Not Registered, the de-registration process is com-
plete. There will not be a confirmation tone.
• If you have to de-register more than one handset, but not all, at one time,
please repeat the above steps for each handset to be de-registered.
De-registering all handsets
To de-register all the handsets currently registered to the telephone base,
perform the following procedures on the telephone base:
• Press
/MENU
SELECT
• Press V
twice to reach the Base Settings option.
CID
• Press
SELECT/
MENU
• Press ^
once to reach the Delete Handsets screen.
DIR
• Press
SELECT/
MENU
• Display shows Del Registration of all handsets.
• Press
SELECT/
MENU
NavKey on the handset to bring up main menu.
NavKey or
NavKey to enter into settings menu.
once or
DOWN
NavKey and you will be prompted to select
to proceed with de-registration or
, the screen will remain blank for a while.
YES
.
.
.
to confirm.
66
four times for settings.
NavKey seven times to select
NO
YES/NO
to cancel.