Re-Registering A Handset - AT&T EP590-2 - 5.8 GHz Expansion Handset User Manual

91-000303-050-000_EP590-2Englishmanual_Sep01,2005.qxd

Re-Registering a handset

You can re-register handsets after deregistration from the base. Or you can re-register
handsets to a new base unit if you have replaced your base unit for any reason.
During re-registration, you must enter the 15-digit ID number of the telephone base.
To find this number, go to the base, select
then select
OK.
Base: Select MENU, then
highlight DISPLAY BASE ID
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
^ V
OK
Handset: Select NEW
SEARCHING
FOR BASE
NEW MENU
ENTER BASE ID
<
OK
Enter base ID, then select OK
ENTER BASE ID
123456789012345
<
OK
PLEASE
WAIT!!
, scroll down to
MENU
To re-register a handset:
• Make sure your handset batteries are properly
installed and charged.
• Your handset will display
• Select on the handset. The handset will dis-
NEW
play
ENTER BASE ID.
• Enter the 15-digit base ID, and then select
• The handset will display
will search for the base.
NOTE: If the registration is successful, the handset will display the
new handset number.
NOTE: If the incorrect registration ID is entered and OK is selected,
the incorrect ID will be deleted and the handset will display Enter
Base ID.
5
2/13/1950 7:21 PM
DISPLAY BASE ID
SEARCHING FOR BASE
.
OK
and then
PLEASE WAIT!!
Page 5
,
.