Getting started Quick reference guide Han�se�� Press to display caller ID information. PHONE�FLASH Press to make or answer a call. During a call, press to receive an incoming call if call wait- ing is activated. MUTE�DELETE While on a call, press to mute microphone.
Getting started Battery installation & charging After battery installation, the battery may have enough charge to allow for some calls. For best performance, place the handset in the charger or telephone base and allow it to charge for 6 hours before use. You can keep the battery charged by returning the handset to the charger or the telephone base after each use.
Getting started Adding and registering handsets Before using a new E598- handset, you must register it with your E590/E590B/E5903B/E59/E59B/E593B/E594B/ E59/E59B/E593B/E594B/E600/E600B/E60B/E603B/ E383B or E604B telephone base (purchased separately). The E590/E590B/E5903B/E59/E59B/E593B/E594B/E59/ E59B/E593B/E594B/E600/E600B/E60B/E603B/E383B E600/E600B/E60B/E603B/E383B E60B/E603B/E383B or E604B can accommodate up to four cordless handsets. The handset provided with the E590/E59/E59 or E600 is E600 is is automatically registered as handset .
Page 5
Getting started Adding and registering handsets NOT REGISTERED PRESS HNDST LOC 4 SEC ON BASE PLEASE WAIT... HS X REGISTERED 12:00PM Before using a new E598- handset, you must register it with the telephone base. Each handset must be registered seper- ately.
Getting started Replacing a handset You may need to de-register your handsets if: You have the maximum number of registered handsets (four) and you need to replace a handset. - OR - You wish to change the designated handset number of your reg- istered handsets.