Registering The Handset - AT&T EP590-2 - 5.8 GHz Expansion Handset User Manual

91-000303-050-000_EP590-2Englishmanual_Sep01,2005.qxd

Registering the handset

Base: Select MENU, then
highlight DISPLAY BASE ID
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
^ V
OK
A new handset will display:
NO BASE
SUBSCRIPTION
<
OK
ENTER BASE ID
<
OK
Enter base ID, then select OK
ENTER BASE ID
123456789012345
<
OK
Before using your new handset, you must register it
with the EP5962 base. During registration, you must
enter the 15-digit ID number of the telephone base.
To find this number, go to the EP5962 base, select
, scroll down to highlight
MENU
then select .
OK
The handset provided with your EP5962 telephone is
automatically registered as Handset 1. Additional
handsets will be assigned numbers in the order they
are registered (2, 3, 4, etc.) up to a maximum of eight.
To add a new handset:
• Make sure your handset batteries are properly
installed and charged.
• The handset will display
and
ENTER BASE ID
• Enter the 15-digit base ID, and then select
• The handset will display
will search for the base.
NOTE: If the registration is successful, the handset will display the
new handset number.
NOTE: If the incorrect registration ID is entered and OK is selected,
the incorrect ID will be deleted and the handset will display Enter
Base ID.
Handset 3
Handset 1 Handset 2
3
2/13/1950 7:21 PM
DISPLAY BASE ID
NO BASE SUBSCRIPTION
alternatively
.
OK
and then
PLEASE WAIT!!
Page 3
,
.