Table of Contents
Advertisement
91-000303-050-000_EP590-2Englishmanual_Sep01,2005.qxd
Battery & charger installation
Installation of Battery pack in Handset
Follow the step below:
1. Remove the battery compartment cover by pressing on the indentation and sliding
downward. Place the new battery pack in the handset with the positive and negative
poles aligned in the battery compartment.
2. Replace the battery cover by sliding it upwards.
3. Place the handset in its charger, and allow it to charge for at least 10-12 hours. After ini-
tial charge, a maintenance charge of 8 hours should be sufficient.
Charging of the Handset battery Pack
The cordless handset is powered by a rechargeable battery pack. It charges automatically
whenever the handset is in its charger. You should charge the battery pack for at least 10-12
hours when you first receive your phone. Average talk time on a fully charged battery is
about 8 hours depending on environmental conditions. The battery charge will last for about
4.5 days if you don't use the phone.
You will know the battery pack needs charging when :
• The low battery message is displayed.
OR
• The handset seems completely dead, the LCD is completely clear and does not
respond when you press the keys.
LOW
BATTERY
Plug power cord into jack on
underside of charger, then plug
transformer into electrical outlet.
2
2/13/1950
Insert supplied
battery.
Caution: Use only supplied recharge-
able battery (model 102) or AT&T
replacement battery model 103.
Place handset in charger for
12 hours before first use.
7:21 PM
Page 2
Advertisement
Table of Contents
